http://guaminsects.net/uogces/kbwiki2015/api.php?action=feedcontributions&feedformat=atom&user=Geetoolii88 2026-05-07T06:11:06Z User contributions MediaWiki 1.24.1 http://guaminsects.net/uogces/kbwiki2015/index.php?title=Kingerlcd&diff=4446 2008-08-15T10:05:29Z

<p>Geetoolii88: New page: 液晶显示模块[http://www.kingerlcd.com LCM]是一种将液晶显示器件、连接件、集成电路、PCB线路板、背光源、结构件装配在一起的组件．英文名称叫...</p> <hr /> <div><br /> <br /> 液晶显示模块[http://www.kingerlcd.com LCM]是一种将液晶显示器件、连接件、集成电路、PCB线路板、背光源、结构件装配在一起的组件．英文名称叫“LCD Module”，简称“[http://www.kingerlcd.com LCM]”，中文一般称为“[http://www.kingerlcd.com 液晶显示模块]”。实际上它是一种商品化的部件．根据我国有关国家标准的规定：只有不可拆分的一体化部件才称为“模块”，可拆分的叫作“组件”。所以规范的叫法应称为“液晶显示组件”。但是由于长期以来人们都已习惯称其为“模块”。 <br /> <br /> 　　液晶显示器件是一种高新技术的基础元器件，虽然其应用巳很广泛，但对很多人来说，使用、装配时仍感到困难。特别是点阵型液晶显示器件，使用者更是会感到无从下手．特殊的连接方式和所需的专用设备也非人人了解和具备，故此液晶显示器件的用户希望有人代劳，将液晶显示器件与控制、驱动集成电路装在一起，形成一个功能部件，用户只需用传统工艺即可将其装配成一个整机系统。 <br /> <br /> 　　从广义上说，凡是由液晶显示器件和集成电路装配在一起的部件都属于“模块”，但实际上我们通常所说的“模块”主要是指点阵液晶显示器件装配的点阵液晶显示模块，特别因为是点阵液晶显示器件产品除某些专用大批量的一些品种(如翻译机、通讯用)，生产厂家是直接向用户供应液晶显示器件外，几乎所有通用型点阵液晶显示器件都是加工成模块后才供给用户的，所以很容易形成“液晶模块”就是“点阵液晶模块”的误解。 <br /> <br /> 一、数显液晶模块 <br /> <br /> 　　这是一种由段型液晶显示器件与专用的集成电路组装成一体的功能部件，只能显示数字和一些标识符号。段型液晶显示器件大多应用在便携、袖珍设备上。由于达些设备体积小，所以尽可能不将显示部分设计成单独的部件，即使一些应用领域需要单独的显示组件，那么也应该使其除具有显示功能外，还应具有一些信息接收、处理、存储传递等功能，由于它们具有某种通用的、特定的功能而受市场的欢迎。常见的的数显[http://www.kingerlcd.com 液晶显示模块]有以下几种。 <br /> <br /> 1．计数模块 <br /> <br /> 　　这是一种由不同位数的七段型液晶显示器件与译码驱动器，或再加上计数器装配成的计数显示部件。它具有记录、处理、显示数字的功能。目前我国市场上能够见到的主要产品有由CD4055译码驱动器驱动的单位液晶显示器件显示模块[http://www.kingerlcd.com LCM]，以及由ICM72ll，ICM7231，ICM7232，CDl4543，UPDl45001，HD44100等集成电路与相应配套的液晶显示器件组装成的4位、6位、8位、10位、12位、16位计数模块．在选用这类计数模块时必须注意以下几点: <br /> <br /> 弄清功能：虽说都叫“计数模块“，但其中大部分并不能直接计数。它们的输人端口有的仅是BCD码接口形式，有的是BCD码加选通端输人接口形式，还有的是可直接与串行、并行口相接的接口形式等等，如需要计算或记录一串数字，还必须配置相应的电路，当然也有将计数电路配好在模块上的产品。 <br /> <br /> 认准结构：液晶显示器件有不同的安装方法和安装结构。固此，在选用时要注意其结构特点，一般来说，这种计数模块大都由斑马导电橡胶条、塑料(或金属)压框和PCB板将液晶显示器件与集成电路装配在一起而成。其外引线端有焊点式、插针式、线路板插脚式几种。 <br /> <br /> 注意电源：一台设备应该尽量使用统一的电源，常见的液晶显示器件计数模块有单电源型和双电源型，有5V和9V等不同规格。 <br /> <br /> 2．计量模块 <br /> <br /> 　　这是一种有多位段型液晶显示器件和具有译码、驱动、计数、A/D转换功能的集成电路片组装而成的模块。由于所用的集成电路中具有A/D转换功能，所以可以将输入的模拟量电信号转换成数字量显示出来。我们知道任何物理量，甚至化学量(如酸碱度等)都可以转换为模拟电量，所以只要配上一定的传感器，这种模块就可以实现任何量值的碉量和显示，使用起来十分方便。计量模块所用的集成电路型号主要有ICL7106、ICL7116、ICL7126、ICL7136、ICL7135、ICL7129等，这些集成电路的功能、特性决定了计量模块的功能和特性。作为计量产品，按规定必须进行计量鉴定。经计量部门批准在产品上贴有计量合格证。 <br /> <br /> 3．计时模块 <br /> <br /> 　　计时模块将液晶显示器件用于计时历史最久，将一个液晶显示器件与一块计时集成电路装配在一起就是一个功能完整的计时器。声于它没有成品钟表的外壳，所以称之为计时模块。计时模块虽然用途很广，但通用、标准型的计时模块却很难在市场上买到，只能到电子钟表生产厂家去选购或定购合适的表芯，计时模块和计数模块虽然外观相似，但它们的的显示方式不同，计时模块显示的数字是由两位一组两位一组的数字组成的．而计数模块每位数字均是连续排列的。由于不少计时模块还具有定时、控制功能，因此这类模块可广泛装配到一些加电、设备上，如收录机、CD机、微波炉、电饭煲等电器上。 <br /> <br /> 二、液晶点阵字符模块 <br /> <br /> 　　它是由点阵字符液晶显示器件和专用的行、列驱动器、控制器及必要的连接件，结构件装配而成的，可以显示数字和西文字符。这种点阵字符模块本身具有字符发生器，显示容量大，功能丰富。一般该种模块最少也可以显示8位1行或16位l行以上的字符。这种模块的点阵排列是由5×7、5×8或5×11的一组组像素点阵排列组成的。每组为1位，每位间有一点的间隔，每行间也有一行的间隔，所以不能显示图形，其规格主要如下表所示：</div>

Geetoolii88 http://guaminsects.net/uogces/kbwiki2015/index.php?title=Recorderss&diff=4445 2008-08-15T09:33:37Z

<p>Geetoolii88: New page: Manufacturers rep. of industrial automation &amp; machine control products including industrial computers, pressure transmitters, thermostats, temperature probes, recorders, pH, ORP &amp; conduc...</p> <hr /> <div><br /> <br /> Manufacturers rep. of industrial automation &amp; machine control products including industrial computers, pressure transmitters, thermostats, temperature probes, recorders, pH, ORP &amp; conductivity sensors, flat panels &amp; touchscreen monitors, digital process meters, signal conditioners, transmitters, isolators, annunciators, totalizers, workstations, motion detectors, counters, valves, graphic operator panels, programmable logic controllers, rheometers, switches, timers, SCR power controllers, industrial workstations, motors, drives, wireless transceivers &amp; PC peripherals. Services for industrial automation &amp; machine control are available. Markets served include food &amp; beverage, pharmaceuticals, marine, military,aerospace, nuclear, scientific, heat treatment, water treatment &amp; power plants.<br /> <br /> Activity: Manufacturer <br /> Brand Names: JUMO, Partlow <br /> <br /> <br /> [http://www.hztalent.com/Paperless-recorder.html paperless recorder]: Paperless Information <br /> <br /> Manufacturers rep. of paperless recorders including strip chart recorders, circular chart recorders &amp; printing, pen, paper recorders expandable up to 36 channels. Consumable include paper, pens &amp; printheads. Applications include data acquisition of temperature, pressure, humidity, flow, pH, ORP, conductivity &amp; measurement values. Markets served include food &amp; beverage, heat treatment, meat processors, pharmaceutical &amp; water treatment. <br /> <br /> The R3000 series Color [http://www.hztalent.com/Paperless-recorder.html paperless recorder] is a kind of the MultiF? intelligent instrument family. It is the solid-state replacement for traditional paper chart [http://www.hztalent.com/Paperless-recorder.html paperless recorder]. <br /> <br /> The recorder offers real-time display of data on a color LCD display and data storage on flash memory. The R3000 has 1~12 universal analog inputs for direct current and voltage signals, thermocouples and resistance thermometers. Sensor type and measurement range are freely configurable. Up to 12 relays is provided to output alarm information.<br /> <br /> Original appearance design, superior hardware quality, perfect software function and reliable mechanical framework make this instrument more cost-effective. In particular, the function of knob operation is a revolution at instrument domain. <br /> <br /> Color [http://www.hztalent.com/Paperless-recorder.html paperless recorder] R3000 can be applied to:<br /> <br /> Chemical processing <br /> Petroleum processing <br /> Metal processing <br /> Power generations <br /> Production of fine chemicals and pharmaceuticals <br /> Food and beverage processing <br /> Environmental monitoring <br /> Manufacturing assembly areas <br /> Wastewater monitoring and recording <br /> Heat treating etc. <br /> Color Paperless Recorder Main Features <br /> <br /> More channels<br /> Up to 12 AI channel, all universal input<br /> <br /> Large capacity of storage <br /> 8M bytes flash memory to storage process data and configuration data, and CF card to transfer data. <br /> <br /> Color screen<br /> TFT true color screen, 256 colors (max.)<br /> <br /> Rich communication interface <br /> RS-232C or RS-485 communication interface are provided. These interfaces make user send data to micro-printer or notebook PC easily. In addition, it can be a node in 485 networking, and can exchange data with PC by suitable management software.<br /> <br /> Convenient print function <br /> Directly linking with micro-printer <br /> <br /> Perfect flux models <br /> 6 Flux models provided: uncompensated, common gas, overheated steam, saturated steam, linear pressure compensation and linear temperature compensation <br /> <br /> Daily, monthly accumulation reports<br /> Daily, monthly flow accumulation or heat accumulation reports of every channel are available. <br /> <br /> Rate alarm<br /> High and low rate-of-change limits are offered besides normal alarm limits <br /> <br /> Broken sensor direction <br /> When thermocouple burns out, the value could be upscale, downscale or hold. <br /> <br /> top <br /> <br /> Color [http://www.hztalent.com/Paperless-recorder.html paperless recorder] Main Specifications<br /> <br /> Analog Input<br /> 12 channels max <br /> Voltage: 0~5V, 1~5V, 0~20mV, 0~100mV, -10~10V;<br /> Current: 0~10mA, 4~20mA;<br /> RTD: Pt100, Cu50;<br /> Thermocouple: E, K, J, S, B, T, N, R, WL5-26;<br /> Power source (optional): 24VDC 50mA short-circuit proof<br /> <br /> Digital output<br /> 12 channels max<br /> 12 output relay, 250VAC, 3A (resistive load);<br /> <br /> Totalizer<br /> Up to 12 channels <br /> <br /> Communications<br /> Media: RS-232 &amp; RS-485; <br /> Baud rate: 1200, 9600, 19200, 57600;<br /> <br /> Sampling period and recording time<br /> Sampling period: 1s<br /> Recording interval: 1/2/4/10/30s, 1/10/30/60min<br /> If 12 trace and 8M bytes memory<br /> Recording interval: 1s recording time 4 days<br /> <br /> Accuracy<br /> Standard signal: ?à0.1% F.S.; <br /> mV signal: ?à0.1% F.S.; <br /> RTD signal: ?à0.1% F.S.;<br /> -10~10V: ?à0.1% F.S.; <br /> Thermocouple: ?à0.2% F.S.<br /> CMRR&gt;120dB; Noise Rejection&gt;50dB (Series mode);<br /> <br /> Power supply<br /> 85V~264VAC; 47~63Hz <br /> <br /> Power consumption <br /> Approx. 50 VA <br /> <br /> Ambient conditions <br /> Operate Temp : 0 to 50??Relative Humidity : 10 to 85% RH; <br /> Transportation and storage temperature : -20 to 60??, Relative Humidity : 5 to 95%<br /> <br /> Dimensions (mm)<br /> Bezel Size: 144 x 144mm<br /> Panel Depth: 240 mm; <br /> Panel cut out: 138 x 138 mm<br /> <br /> Housing<br /> Panel mounting <br /> <br /> Screen<br /> Color: color<br /> Resolution: 320 x 240 pixels</div>

Geetoolii88 http://guaminsects.net/uogces/kbwiki2015/index.php?title=HkLogin&diff=4442 2008-08-15T08:52:02Z

<p>Geetoolii88: New page: 指控一家[http://www.hkrr.info 注册香港公司]在内地生产销售“美孚”牌产品 “美孚”系列产品一直都是美国埃克森美孚集团的拳头产品。近...</p> <hr /> <div>指控一家[http://www.hkrr.info 注册香港公司]在内地生产销售“美孚”牌产品<br /> <br /> “美孚”系列产品一直都是美国埃克森美孚集团的拳头产品。近年来，一家[http://www.hkrr.info 注册香港公司]却也公然在中国生产销售“美孚”牌润滑油等产品。埃克森美孚集团下属的三家公司将这家香港公司及其中国内地的生产、销售商起诉到法院，以商标侵权和不正当竞争为由索赔５０万元，并要求对方立即停止侵权。昨天，上海一中院开庭审理此案。<br /> <br /> ３公司来沪起诉<br /> <br /> 此次向法院起诉的三名原告均隶属于美国埃克森美孚集团，分别是第一原告埃克森美孚公司、第二原告美孚石油有限公司、第三原告埃克森美孚（中国）投资有限公司。<br /> <br /> 目前，所有包含“Ｍｏｂｉｌ”文字的商标注册人都是第一原告，而“美孚”文字的商标注册人则为第二原告。中国消费者对于这些商标究竟隶属于哪家公司以及各公司之间的关系或许不太熟悉，但一说起“美孚灯”，恐怕上了年纪的中国人心中都会有不少回忆。带有“Ｍｏｂｉｌ／美孚”、“美孚”商标的润滑油和燃料等产品已经在中国销售了一个多世纪。自１９９６年埃克森美孚（中国）投资公司也就是第三原告成立后，就根据美国公司的授权，在中国大陆全面负责推广、销售“Ｍｏｂｉｌ”、“美孚”商标的润滑油等产品。<br /> <br /> 指控冒用商标<br /> <br /> 但是，近年来，美国埃克森美孚集团却在中国屡屡发生其他公司冒用“美孚”、“Ｍｏｂｉｌ／美孚”等商标，销售润滑油等产品。在沪松公路的上海松泾实业有限公司，埃克森美孚集团的代理人购买到了两桶“美孚”牌燃油，而埃克森美孚集团并没有授权这家公司可以使用“美孚”商标。非法使用“美孚”等商标的不仅仅这一家公司，一场商标维权和打假行动由此展开。<br /> <br /> 根据三名原告的指控，第一被告美国美孚国际石油集团有限公司由周文斌等人于２００２年９月在香港成立注册资本为１万港币的[http://www.rfhk.org 香港公司注册]成功，并于２００２年１２月４日在西安设立办事处，首席代表周文炳。注册资料反映，周文炳和周文斌实为同一人。代表处的业务是“Ｂｏｉｌ润滑油生产销售的咨询和联络”，但该代表处目前实际上在推广润滑油产品。第二被告西安焱青科技发展有限公司和第一被告是关联企业，第二被告为第一被告生产润滑油产品，且目前仍在生产带有“美孚”标志的油料产品。第三被告上海松泾实业有限公司于２００４年９月成立，经营范围为五金电器、电子产品、汽摩配件、通信设备等商品的批发零售，其经营的产品中包括由西安公司生产、香港公司经销的“美孚”润滑油。在原告看来，三家被告公司构成了产、供、销链条。“很明显，对方故意地利用一个看似合法的香港公司来误导消费者，那家所谓的[http://www.hkrr.info 注册香港公司]实际是一个皮包公司，在香港没有自己的营业场所。”原告的代理人在法庭指控，“他们在大陆销售假冒香港产的‘美孚’润滑油。”<br /> <br /> 原告认为，第一被告美国美孚国际石油集团有限公司的名称本身就引人误解。由于三原告对于“美孚”商标及商号享有极高的声誉，消费者会误以为[http://www.rfhk.org 香港公司注册]的那家公司是埃克森美孚集团的成员或者是关联公司。三名被告通过在制造、经销或销售的润滑油产品上使用“美孚”“Ｍｏｂｉｌ”等名称，不正当地利益埃克森美孚集团下属企业的商誉，搭原告的便车，不但侵犯了“美孚”、“Ｍｏｂｉｌ”的商标权，也构成不正当竞争。遂要求被告停止使用带有“美孚”文字的润滑油产品，并销售产品包装和宣传资料，注销以“美孚”为关键字的网络域名，并连带赔偿５０万元人民币，同时在报纸上刊登启事、消除影响。<br /> <br /> 被告否认侵权<br /> <br /> 审理中，第一被告没有出庭应诉。第二被告辩称，[http://www.rfhk.org 香港公司]的“美孚”商标在香港和中国内地合法注册，可以正常使用，并没有侵犯商标权。而且第二被告与第一被告没有任何关联，也从未宣称过自己与埃克森美孚集团之间有任何关联，５０万元的赔偿数额也没有计算依据。第三被告辩称，该公司是某轮胎品牌在上海松江的代理商，从不经销汽油，与[http://www.rfhk.org 香港公司]没有关联，与西安公司也没有业务往来。该公司内部的两桶“美孚”汽油是司机从外面买来的，主要给客户调试轮胎时使用，不是用作销售。目前，案件还在审理当中。</div>

Geetoolii88 http://guaminsects.net/uogces/kbwiki2015/index.php?title=Processck&diff=4440 2008-08-15T08:03:14Z

<p>Geetoolii88: New page: Overview process calibrator Process calibrator, the signal source. Process calibrator is divided into pressure calibration, multi-function validator, temperature calibration, the cali...</p> <hr /> <div><br /> <br /> Overview process calibrator<br /> <br /> Process calibrator, the signal source. Process calibrator is divided into pressure calibration, multi-function validator, temperature calibration, the calibration loop / process Qianbiao / process multimeter, loop calibrator, the main function for measuring sensors, transmission And other instruments of voltage, current (mA), RTD, thermocouple, frequency and resistance, the output / analog transmitter calibration required voltage, current (mA), thermocouple, RTD, frequency, resistance, And pressure. Current measurement of the loop at the same time provide power transformers. Pressure [http://www.hztalent.com/Process-calibrator.html process calibrator] with the pressure measurement modules / output pressure, loop calibrator can mA source, simulation and measurement<br /> <br /> Knowledge of the process calibrator<br /> <br /> A single instrument to perform all most common test and calibrations on process control equipments and systems. 15 different functions available in a rugged, compact, two channel and dual LCD display unit.<br /> <br /> Measure of: Voltage, current, DC inputs, true RMS AC and AC+DC, min, max, Avg, Frequency duty cycle and pulse width, temperature, Ohms and continuity, Diode, 1ms fast peak hold.<br /> <br /> Simulation of:Constant bipolar Voltage and Current source, Simulate current using external loop power, Frequency with selectable amplitude, duty cycle and pulse width, programmable 999 values ramp and 16 steps for continuous, scan or cycle output.<br /> <br /> <br /> Applicable to the Process calibrator and the need for inspection equipment, extensive resources / measuring instruments in this field, sensors and equipment require substantial operational inspection. CA71 portable calibrator is a process structure, light weight, multi-checking function of the apparatus, can be a source and measure voltage, current, resistance, TC, RTD, frequency and pulse measurement of the signal at the same time. CA51 portable [http://www.hztalent.com/Process-calibrator.html process calibrator] is the basis of a model, in addition to TC and RTD measurements and communications functions, and other features CA71 same.<br /> <br /> At the same time the process calibrator signal and measurement capability to when the problem occurred, CA71 process calibrator can also detect normal thermocouple (TC), heat resistance (RTD) and a variety of other types of sensors and equipment. (Thermocouple (TC) and heat resistance (RTD) measurements limited to CA71)<br /> <br /> AC voltage [http://www.hztalent.com/Process-calibrator.html process calibrator] (including the power supply voltage) measurement capability: for example, in the process calibrator of the instrument panel, the functioning of the large number of signal converters and other equipment, portable process calibrator can detect each of input and equipment And the output signal could be detected at the same time power supply, no separate multimeter measuring supply voltage. [http://www.hztalent.com/Process-calibrator.html process calibrator] variety of useful features<br /> <br /> Source: 4-20 mA current, 24 V DC DC power supply. Communication process calibrator (only CA71): compatible with RS-232C interface. Step-by-step process calibrator output (n / m) feature: Set step-by-step output, from the trouble calculated as a percentage of output. Stepping automatic process calibrator features: step-by-step through the output (n / m) feature set, the output value of stepping change. 10% or 25% step will automatically change<br /> <br /> Calibrator scanning process: linear value increased or decreased output. Rise and fall times set in between 16 or 32 seconds. [http://www.hztalent.com/Process-calibrator.html process calibrator] memory function: can the portable calibrator in the preservation of memory or read in value and the measurement data. (Set Max 50) process calibrator is simple: a portable process calibrator function switch, simple operation. Open the box and connect portable test line, you can prepare measurement</div>

Geetoolii88